All data is for information only------(<---links)
	PRODUCT DATA of MAP - SG120FD

Material	MAP - SG120FD
Product Type	Matt-white Thermal-control Paint
Chemical Composition	Silicone / Zinc Oxide
Name of Manufacturer	Société MAP S.A. Z.I. rue Clément Ader, F-09100 Pamiers, France +33 (0)5 34 01 27 00 +33 (0)5 61 60 28 77 map@map-coatings.com www.map-coatings.com

	EXPERIENCE IN PRACTICE

Development Status	Special Commercial Product
Cost Range	Low
Lot Reproducibility	Good
Equivalent Designations	MAP - SG 121FD
Space Experience	Fair

	PHYSICAL PROPERTIES

Thickness	0.1 to 0.12 mm Data Quality: Manufacturer's data
Shelf Life	6 month Data Quality: Manufacturer's data

	OPTICAL PROPERTIES

Hemispherical Emittance	0.87±0.02 Remark:(Aluminium substrate) ECSS-Q-70-09, depends on topcoat thickness
Solar Absorbtance	0.17±0.04 Remark: (Aluminium substrate, coating 100mm thick) ECSS-Q-70-09, depends on topcoat thickness

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

Atomic Oxygen	Δe = -0.24mm, Δαs = +0.01, Δε = 0.00 Test:2 x 10^20 atoms.cm^-2
UV Radiation	Δαs=0.05 Test:1000 esh @ 40°C
UV Particle Effects	Δαs = +0.33, Δε = -0.02 Test:2.5 years GEO
Thermal Cycling	Pass Test:200 cycles 10-6 torr (-170°C to +120°C).
Outgassing	TML = 0.55%, RML = 0.54%, CVCM = 0.04% (with PSW primer) TML = 0.98%, RML = 0.87%, CVCM = 0.03% (with PS + PSW primer) Test:ECSS-Q-70-02
Induced Surface Potential	0 V 1nA / cm2, 15 keV 0 V 5nA / cm2, 20 keV

	SPECIAL RECOMMENDATIONS

Special Recommendations

Room temperature curing. · It is mandatory to use PSI or PSW primer before SG120FD to ensure it’s adhesion to any substrate. Moreover, on some substrates it is necessary to use PS primer before applying PSI or PSW primers. · See manufacturer’s data.